BoiE Certified Training & Equipment


At BoiE - We Know Indoor Air QualityMy AccountCall 800-432-4418Order/Enroll

Call 800-432-4418Order/Enroll

BoiE Ozone Generators, Hydroxyl Generators & Training
  • 24x12x13 inches, just 18lbs
  • Stainless Steel Ozone Plates
  • AC Outlet, High/Low Switch
  • BoiE SHOCK 96K Adjustable Ozone Cannon Demonstration

SHOCK CANNON 96K Ozone Generator
Powerful Ozone Output: 96,000 mg/hr with Stainless Steel Plates

$1,195 Buy

Click to order

Great for Large Homes, Air Ducts, Gyms and Warehouses
Treats Up to 9,600 Square Feet, Includes 1-Touch Timer

Power Matters. We use the latest high-frequency electronic transformers and space-saving electrode design that produces 4x more ozone than older technology, reducing application times by 75 percent!

The BoiE Shock Cannon 96K is one of the most powerful corona discharge ozone generators on the market for disinfection-level odor removal and mold eradication. The Shock Cannon produces 96,000 milligrams of ozone per hour (from ambient air) for shock ozone treatment* of spaces up to 9,600 sq. ft. There is no other similar-powered ozone generator at this low price point.

BoiE designed the Shock Cannon to be the ultimate ozone generator for those struggling to solve serious odor problems in large homes, office buildings, warehouses, HVAC systems or mold-contaminated spaces where more ozonated air is needed. Our customers have often had limited success with other products, and are looking for a better quality ozone generator with the power to get the results they need, and at a reasonable price.

How it Works:
The Shock Cannon is simple to operate, service and repair. The unit is shaped like a cannon with a solid stainless-steel drum to survive the harshest environments. A powerful 235 CFM fan pulls fresh air across ultra high-quality 304 stainless steel ozone plates, then blasts the ozonated air out the front. The ozone output can be toggled between 64,000 mg/hr or 96,000 mg/hr depending on the size of the treatment area and the length of treatment.

The rear of the Shock Cannon can be connected to ducting to draw in supply air from a better air source when available, such as a window, doorway or different room. This useful feature results in quicker treatments and cleaner ozone since the machine is not recycling the same air. The front of the Shock Cannon can also be ducted to funnel ozone into an enclosed space. The 10-inch duct attachment that fits either end is available at check-out.

The unit's poly ends can be opened for service by removing just two screws. The Shock Cannon has BoiE's universal power inlet that accepts standard, straight-blade extension cords, allowing you to leave the tangled power cords behind, and an accessory power outlet that lets you connect equipment such as fans or additional ozone generators. BoiE ozone generators will never become obsolete and with minimal maintenance, can last a lifetime. Plus, we stand behind every machine we sell with a money-back guarantee and lifetime customer support.

Bottom Line:
The BoiE Shock Cannon 96K is a true ozone powerhouse that will do the job fast, and at a reasonable cost. The "weekly rental" for a machine like this exceeds our sales price! Corona discharge ozone is most beneficial under cool and dry conditions, preferably under 75°F, or when air conditioning can be used to cool and dehumidify an interior environment. When the environment is very warm or humid and cannot be cooled or dehumidified, UV ozone is often a better choice. Corona discharge ozone machines cost less and produce more ozone for the energy expended than any other method and can last for years with minimal maintenance.

Like all BoiE products, the SHOCK CANNON was designed by professionals for professionals to be a field-ready workhorse that exceeds, outlasts and outperforms the competition.

Ozone Remediator Certification (Limited Time Offer)
Your purchase includes BoiE's exclusive 32-hour, comprehensive Ozone and Hydroxyl Remediator certification course. Learn how to properly apply ozone and utilize hydroxyl generation for odor removal, disinfection and restoration applications. Learn the protocols, how to identify and assess the source of odors, corrective measures and preparing treatment reports. Provides a path for starting a new business or expanding your current services. Course includes a helpful Online DVD with demonstration videos. You can enroll and simply use the course material as a reference if you don't need the certification.


  • Stainless steel drum for the harshest environments
  • Light and portable to fit in small areas like crawl spaces
  • Rocker switch to activate either 64K or 96K output
  • Quiet but powerful 235 CFM air puller fan
  • Grounded wiring system and accessory outlet with circuit breaker
  • Wiring connections located away from the ozone flow direction
  • Marine-grade straight blade inlet receptacle and accessory outlet
  • Long-life 304 stainless steel ozone plate electrodes
  • 304 Stainless Steel fasteners
  • Quick-change "solder-free" ozone plates, just 4 screws
  • Marine-grade tin-plated copper wiring
  • Waterproof heat shrink electrical crimp connectors
  • Anti-oxidant compound applied to copper wire connections
  • Dielectric silicone paste used to protect metal parts from corrosion
  • Overload-protected, short-proof transformers
  • BoiE warranty which exceeds the industry standard


Type of Use:

Commercial shock treatments with low to moderate humidity

Case Material:

Stainless steel cylinder with molded poly end castings


1-position discharge


High Visibility OSHA Yellow/Silver

Shock Coverage:

Maximum 9,600 square ft building with 10 ft ceilings

Run Time:

20 minutes per 1,000 square ft for heavy odors, 3:12 max run time


235 cubic feet per minute (CFM)

Hose Attachment:

Optional flange/duct attachment available

Electrical Rating:

120V~60Hz 5.8 Amps

Overcurrent Protection:

Yes, circuit breaker (push to reset)

Generation Method:

Corona Discharge


Selectable 64,000 mg/hr or 96,000 mg/hr (ambient air)


Double-sided Ceramic, 304 Stainless Steel Electrodes
Working Temperature: 14°F-104°F, 35%-85% Relative Humidity (RH)

Power Connection:

Straight Blade Inlet Receptacle, Marine-grade

Accessory Outlet:

3-prong grounded

Power Switch:

High, Low, Off positions


24.5 x 12.5 x 13.5 inches


18 lbs


20' Grounded Power Cord
1-Touch Countdown Timer (15/30/60 min, 2/4/6 hrs)

*Shock Ozone Treatment
A minimum ozone concentration of 10 parts per million is required to reach a fully-effective germ/virus/mold-killing level as established by the EPA's National Risk Management Research Laboratory.¹ Don't be fooled by manufacturers that claim to shock treat large spaces with a small or unspecified amount of ozone. An ozone generator must produce around 1,000 mg/hr of ozone to shock treat an average 100 sq. ft. room. Low-power ozone generators will leave an ozone scent but odors will quickly return.

1. Raymond S. Steiber, Ozone Generators in Indoor Air Settings, National Risk Management Research Laboratory, Page 8 (1995)

BoiE AC-powered Ozone Generators

Shock AQUA 2000 Ozone GeneratorAQUA 2000

SHOCK Junior 8K Ozone MachineJUNIOR

SHOCK Compact 16K Ozone MachineCOMPACT

Shock PRO-D Ozone MachinePRO-D

Shock Toolbox Ozone MachineTOOLBOX

SHOCK Cannon 96K Ozone MachineCANNON

Ultraviolet Light Ozone GeneratorULTRAVIOLET

Ozone Generator Product LineAbout Ozone Products

BoiE 12 Volt Ozone Generators

AQUA DC 1000 Ozone GeneratorAQUA DC

MOBILE DC 3500 Ozone GeneratorMOBILE DC



SPORTSMAN DC PRO 4500 Ozone GeneratorDC PRO

12 Volt Ozone Generator Product LineAbout Ozone Products

Related Products

Shock Ozone MeterShock Ozone Meter

Hydra Fusion hydroxyl generatorHYDRA FUSION

Ultrasonic Hydroxyl AcceleratorHydroxyl Accelerator

Hydroxyl Generator Product LineAbout Hydroxyl Products

Why Customers Trust BoiE

We have been in business since 1999 and are well-known throughout the indoor air quality (IAQ) industry. We offer environmental training and manufacture the best ozone generators and hydroxyl generators available. We offer a 30-day money-back guarantee, a 1-year unlimited warranty and lifetime customer support. Read our FAQs page for terms, conditions, and lead times.

We take pride in our products and training and are always there to offer help and support. We know how much your business reputation depends on using reliable products with top-notch support if anything goes wrong. We are on the cutting edge of the industry and are always looking for ways to improve our products and offer you more value.

We build the best ozone and hydroxyl generators on the market today. Every unit is assembled in-house and goes through quality control and rigorous testing before we ship. If something goes wrong or wears out, we carry every part and will offer the best solution to get you up and running quickly!


Credit CardsPaypal Credit

© Copyright BOI Environmental Training. All Rights Reserved.